Concrete cutting in Elko NV - clean cuts and a quote that says what's included
Need an opening in a slab, a trench for a pipe or a hole through a wall? We cut it where you need it.
What does it take to get concrete cut in Elko?
Concrete cutting in Elko means using diamond saws and drills to cut through slabs, walls and columns, so you get a trench for a new line, an opening for a door or a round hole for a pipe without breaking up the concrete around it. The saw work is usually the quick part, and finding out what's inside the concrete first is what can take longer.
Most folks who call Elko Concrete about cutting have a plan that needs concrete out of the way, like a drain line across a garage floor, a basement window or a cracked section of driveway that has to come out before new goes in. What moves the price is the surface, how many feet of cut there are, how thick the concrete is and how much steel is in it, and whether the pieces get hauled off or left in place. The schedule mostly turns on what's inside, because a slab with tensioned cables or structural steel can need a scan and an engineer's input before anyone cuts, and on whether the work needs a permit, which we look into at the estimate. I'll walk the job with you and put your own figure in a written estimate.
What our concrete cutting work involves
Before we bring a saw, I ask what's being cut and what might be inside it, because once a blade goes through a water line, a wire or the rebar, which is the steel that holds a slab together, there's no taking it back. If you've got drawings of the house or the slab, we go over them together, and if there's any chance of tensioned cables or structural steel in the path, we sort that out before the cut gets booked. Then we mark the line, set up the saw or drill that fits the surface, make the cut and clean up the work area. I'll also tell you up front whether hauling the pieces away is part of the estimate, so you're not surprised by a stack of concrete sitting in your yard.
Cutting is often the first half of a bigger job. A trench across a driveway or a cracked section cut out needs new concrete poured on a dug-out, packed base, and that's concrete driveway building work we do too. The same goes for an old patio that's been cut out or a slab opened up for a new door, which leads into concrete patio construction, where we give the base under the slab the same attention as the finish on top.
Permits, licenses and concrete cutting in Elko
In Elko, the city's building official issues permits for work that builds, alters, repairs or tears down a building or structure, unless the code exempts it. Whether your cut falls under that depends on what's being cut, since a trench in a garage floor and a new opening in a foundation wall aren't the same job, so we look into it during the estimate and pull the permit ourselves when the job calls for one. It's worth getting right, because the city holds the present owner responsible for fixing work done without a required permit, even when a contractor did it or it came with the house. On the licensing side, the Nevada State Contractors Board sets the license classes for contractors in the state, and Diamond and Core Drilling is one of them.
On jobs around Elko and out in Spring Creek, the calls we get are usually homeowners and landlords adding a line under a garage floor, opening a basement wall for a window or door, or cutting out a tired section of driveway so new concrete can go in. Older slabs can hide patched lines and steel nobody remembers putting in, so we treat drawings and the owner's memory as good clues rather than the final word.
How concrete cutting works with us
Call or send the form
Tell us what needs cutting, where it is and roughly how long the cut runs. We'll get back to you and set a time to come look.
I look and write the estimate
I come out, see the surface and ask how you'll use the opening and what might be inside it. The estimate spells out the method, the feet of cut, any scanning and whether hauling is included, so you can compare it line by line against anyone else's quote.
We handle permits and the date
Once you're ready, we sort out the permit side if the job needs one and keep you posted on where things stand with the city. Then we set a cutting date that suits the job and the conditions.
We cut and clean up
We make the cut, clean up and take away whatever the estimate covers. If new concrete is going back in, we tell you how to care for it while it cures, which is the wait before it's strong enough to use.
Get an estimate for cutting your slab, wall or driveway in Elko
Send the form and we'll reply within one business day to set a time for me to come out. The estimate is free, done at your property and comes with no obligation. I'll look at what's being cut, ask what's inside it and write up the method, the length of the cut and whether hauling's included.
Questions before you book concrete cutting
What concrete cutting method is right for my job?
The surface decides it. Flat sawing handles horizontal slabs like floors, driveways and sidewalks, while wall sawing uses a saw that runs on a track mounted to the wall for vertical cuts and openings a floor saw can't reach. If you need a round hole of a set size for a pipe, conduit or an anchor, that's core drilling, so a new line through a slab or wall gets a drill rather than a saw.
How much does concrete cutting cost in Elko, NV?
Professional saw cutting of slabs across the US usually runs about $4 to $15 per linear foot of cut, and that covers the sawing itself. Thicker or reinforced slabs cost more per foot than plain, easy-to-reach ones, and a small job may come down to a minimum or mobilization charge, the cost of getting the crew and saw there, instead of the footage. Removal and scanning can add to the total, so your written estimate is where your real number lands.
Does the price of concrete cutting include hauling the concrete away?
Not always, because sawing and removal are separate jobs and a cutter may leave the cut panels right where they are. Breaking up, hauling and disposal can cost more than the sawing itself, so ask any contractor whether removal is in the quote, us included.
Who can get a permit for concrete cutting work in Elko?
The city can issue a permit to a contractor who holds a Nevada contractor's license in the right classification and a City business license. That's worth checking before you hire anyone to cut into a building.
How do I know if there's rebar or cables in my slab before cutting?
If a cut could cross post-tension cables, which are steel cables pulled tight inside the slab, or other structural steel, the contractor may need the building drawings, a GPR scan and an engineer involved before work starts. GPR is ground-penetrating radar, a scan that shows what's buried in the concrete without opening it up. If your house might have that kind of slab or wall, plan on extra time for this step.
What is the best way to keep dust down when cutting concrete?
Water on the blade, which OSHA, the federal workplace safety agency, says substantially reduces the dust from cutting concrete. Most sawing runs wet, and that turns the cuttings into slurry, a gray runoff the crew vacuums up or contains, so it's fair to ask any crew where that runoff will go.
Why Elko homeowners call Elko Concrete for concrete cutting
I'm on site for the cut
I come out to look at every job and write the estimate myself, and I'm on site with our crew while the work gets done. The person who heard what's inside your wall is the one standing next to the saw.
Years spent fixing failed concrete
Before starting Elko Concrete in 2023, I spent years doing upkeep for a property management company, patching cracked walks, broken steps and sunken slabs between tenants. That's where I learned how a careless cut or a skipped step turns into a repair down the road.
Licensed and insured before we cut
We're fully licensed and insured. It's the first thing to check before anyone takes a saw to your house, and the city's permit rules ask for the right state license too.
On a cutting job, what matters most is knowing what's inside the concrete before the blade touches it. Get in touch and I'll come out and take a look.
Work that often follows a cut
Concrete driveway building
Once a trench or section is cut out of your driveway, new concrete has to go back in on a packed base so the patch sits level.
Concrete patio construction
If you're cutting out a cracked patio or opening a slab for a new door, we can pour the new patio that goes in its place.
Call Elko Concrete about your slab or wall
Have the surface, the length of the cut and any building drawings ready when you call (775) 510-0139 or send the form, so the first conversation gets us further along.
